Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Coral Springs?
Spring replacement in Coral Springs typically costs an estimated $180 – $340 per spring, and that’s for one spring only. Most doors use a matched pair, and since a pair is usually replaced together, expect roughly double that range for the full job. The written estimate we give you after looking at the door sets the final price.
Spring work is the most mechanically dangerous repair in the trade. A torsion spring under load stores serious energy, and a cable under that same tension can whip if it lets go. That’s why this is a job we treat as safety-critical from the first call, and why we won’t talk you through doing it yourself. What you get from us is a straight answer on what’s wrong, a clear price, and a door that lifts normally again with one call covering both the spring system and the opener. Our technicians have up to 14 years of experience with torsion and extension spring setups, and we service the brand already in your garage rather than steering you toward something new.
Key Takeaways
- Single spring: typical estimated $180 – $340. A matched pair usually runs about twice that.
- Most residential doors here have two springs that should be replaced as a set, not one at a time.
- South Florida humidity and near-daily heat cycles wear springs faster than cooler climates.
- The brand of door matters less than getting the correct wire gauge and cycle rating for its weight.
- Free estimates and upfront pricing before any work starts.
Spring Replacement Cost Breakdown (2026)
The ranges below are typical estimates for the Coral Springs market. They’re per job unless a line says otherwise, and the written estimate sets the final price.
| Line item | Typical estimated range |
|---|---|
| Spring replacement (one spring) | $180 – $340 |
| Spring replacement (matched pair, about double) | $360 – $680 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| General garage door repair | $150 – $600 |
What pushes a spring job toward the top of the range? The wire gauge and cycle rating of the spring, whether the door has a torsion or extension setup, and whether the cables, drums or center bearing plate also need attention while the door is apart. A heavier insulated door takes a heavier spring, and that spring costs more than one for a basic single-car door. If the opener is straining at the same time, addressing it inside the same visit usually costs less than scheduling it separately. If you’re weighing a repair against a replacement, our Coral Springs Garage Door Repair Co team can lay out both options in one estimate.
What Affects Spring Replacement Pricing in Coral Springs
Coral Springs is warm and humid nearly all year, and that shapes how springs age here. There’s no freeze to worry about, but the heat and moisture cycle the metal constantly. Here’s what actually moves the price.
- Torsion vs. extension springs. Torsion springs run on a shaft above the door and are more common on newer doors; extension springs stretch along the sides on older setups. Torsion work takes more setup and more care, and it’s usually the higher end of the range.
- One spring or two. If your door has two springs and one has broken, the other is the same age and has lived the same wear. Replacing both at once costs about double a single spring but avoids paying for a second visit soon after.
- Door weight and material. A single-car door in a lighter gauge is easier on springs than a wide, insulated double door. The heavier the door, the heavier the spring required, and the price follows.
- Spring cycle rating. Standard springs are rated for a certain number of cycles. Higher-cycle springs cost more up front and last longer. For a door that’s the main entry to the house and gets used several times a day, that trade-off is worth a look.
- Related wear found at the same time. Cables, drums, and bearings take the same load as the springs, and inspecting them is part of the job. Finding a frayed cable during a spring replacement and fixing it in the same visit is more efficient than a second call.
- Access and door condition. Tight clearance over a low-headroom door or a neglected, out-of-balance door can add labor. Neighborhoods across Coral Springs vary in home age, and older doors often need more adjustment alongside the spring swap.
Whether you’re near the Heron Bay side of town or in a community off Coral Ridge Drive, the variables are the same: spring type, door weight, and how much related hardware needs attention. Our spring replacement page covers the mechanical side in more detail if you want to understand what the technician is working with.
How to Save on Spring Replacement
You can’t safely skip spring replacement or stretch a worn one. What you can do is avoid paying twice for the same job.
- Replace the pair, not one spring. If one of two springs broke, the other is on borrowed time. Doing both now usually costs less than a single-spring job now plus a second service visit for the matching spring later.
- Get the estimate in writing before work begins. A written estimate that lists parts and labor lets you compare fairly and avoids surprise add-ons.
- Ask about related wear during the same visit. If the rollers are flat or a cable looks frayed, addressing it while the door is already open saves a trip charge. Roller replacement runs an estimated $110 – $220 and cable repair an estimated $130 – $250.
- Consider cycle rating once, not repeatedly. A higher-cycle spring costs more today but can mean fewer replacements over the life of the door.
- Don’t defer a broken spring. Trying to run the opener with a broken spring strains the motor and can cause a second, costlier repair. Call us fast so it’s solved in one visit.
Free estimates take the guesswork out. Call (877) 510-2936 and we’ll give you a real range for your door.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Coral Springs?
An estimated $180 – $340 for one spring. If your door has a matched pair, which is common, the job usually runs about twice that, an estimated $360 – $680, since both springs are typically replaced together. The written estimate sets the final price. Call (877) 510-2936 for a free estimate.
Is it cheaper to replace both springs or just the broken one?
Replacing both springs at once is cheaper over time than two separate single-spring visits. A single spring runs an estimated $180 – $340. A matched pair usually costs about double in one visit, which beats paying for two service calls when the second spring fails. Call (877) 510-2936 and we’ll quote the pair for your door.
Can you fix a broken spring the same day?
Yes, same-day spring replacement is often possible, and we offer emergency garage door service so you’re not stuck waiting with a door that won’t open or close. Spring failure is a safety issue, so we prioritize it. Call (877) 510-2936 to check availability and get a free estimate.
Why did my spring break so quickly in Coral Springs?
Heat and humidity accelerate spring wear, and a spring used as a primary entry can cycle dozens of times a day. South Florida doesn’t have a freeze problem, but constant warm, humid conditions take their toll on the metal. A higher-cycle spring and annual inspections help. Call (877) 510-2936 to have yours checked.
Do you service LiftMaster, Chamberlain and other spring-and-opener brands?
Yes. We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we work on the brand already in your garage. One call covers both the springs and the opener. Call (877) 510-2936 for a free estimate.
Why Choose Us for Spring Replacement in Coral Springs
Spring replacement isn’t a side job we squeeze in. It’s a named, safety-critical service, and we treat it that way. We handle both the door system (panels, springs, tracks, hardware) and the opener layer, so most customers never need a second company. That continuity matters when a worn spring and a straining opener show up in the same week.
Emergency garage door service means a door stuck open or shut doesn’t sit broken until the next business day. Upfront pricing means you know the price before anything happens. And because we’re multi-brand, we’re not steering you toward one preferred product line. We service the door you already have, repair what’s repairable, and replace what’s not. Installed, repaired, or replaced, one call covers the full life of your garage door.
Our Process
When we arrive in Coral Springs, we inspect the full door system: springs, cables, drums, bearings, rollers, and the opener. We check the door’s balance and how the operator is responding. Then you get a clear, written estimate with the recommended repair and the typical range, plus any related wear we think is worth addressing now rather than later. If you approve, the work happens on the spot in most cases, with the specific parts for your door’s weight and brand. We rebalance the door, test the safety reverse, and walk you through what was done. No pressure, no upsell on equipment you don’t need.
When to Call for Spring Replacement
Common signs a spring is failing or has failed include a loud bang from the garage, a door that feels unusually heavy when you try to lift it by hand, a door that opens a few inches then stops, a visible gap in a torsion spring, or a door that’s visibly crooked. Any of these is a safety issue, so stop using the opener and call. A technician can confirm the problem and give you a free estimate. Our team serves homes throughout Coral Springs, from Heron Bay to the communities off Coral Ridge Drive and beyond, and the same call covers both the springs and the opener.
Contact us today for a free estimate on your spring replacement in Coral Springs. Call (877) 510-2936, tell us what the door is doing, and we’ll have a trained technician give you a clear range and next steps.
Pricing reflects the Coral Springs market as of 2026. Coral Springs Garage Door Repair Co offers free estimates – call (877) 510-2936.
Written by the team at Coral Springs Garage Door Repair Co.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Lucia Herrera"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Rosa Vargas"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Chris Rhodes